What is a crystal to the new chemical crystallographer,after that first,automated structure analysis?

This educational review postulates the importance of maintaining an adequate level of crystallographic education among structure-dependent scientists whose interests are not primarily in crystallography, at a time when automation and validation have made it possible to obtain high-quality structure analyses in many cases with a minimum of crystallographic background. The topics addressed are intended to form a second round of crystallographic education for a novice user whose first round involved hands-on experience with structure solution and an introduction to elementary concepts. The specific topics, chosen for their relevance as basic knowledge and their lack of emphasis in many formal treatments, are (1) crystallographic reference frames and the utility of the reciprocal cell in geometrical calculations; (2) the relationship between the two concepts that constitute our model of the crystal, namely the unit cell and the lattice; (3) the manner in which an atom is represented in concept and in practice; (4) the importance of interleaved symmetry elements required by the presence of additional symmetry on a lattice; (5) the harnessing of the natural properties of the crystalline state for the potential manipulation of properties of synthetic crystals; and (6) useful terminology for navigating a crystal structure.     

Logarithmic decrease of adhesion force with lateral dynamic revealed by an AFM cantilever at different humidities

Adhesion forces between a tipless cantilever and an Au film were determined to investigate the influence of lateral velocity by recording force curves with an atomic force microscope at 20%–90% relative humidities. The sample was moved laterally, forth and back, with a frequency of 0.001–100 Hz and scan distances of 0.8, 8, and 80 μm to achieve a velocity ranging over 7 orders of magnitude. Experimental results show that at low lateral velocities (between 1.6 nm/s and 1–10 μm/s), the adhesion force either increases or decreases or remains stable with the lateral velocity without a certain characteristic trend. However, after a critical velocity, the adhesion force decreases logarithmically with the lateral velocity (between 1–10 and 16,000 μm/s). The decreasing magnitude can be as large as 97.3% of the maximum adhesion force. This decrease is well-explained by the contact time dependence of water bridges formed by capillary condensation.     

Photophoretic Levitation of Macroscopic Nanocardboard Plates

Scaling down miniature rotorcraft and flapping-wing flyers to sub-centimeter dimensions is challenging due to complex electronics requirements, manufacturing limitations, and the increase in viscous damping at low Reynolds numbers. Photophoresis, or light-driven fluid flow, was previously used to levitate solid particles without any moving parts, but only with sizes of 1–20 µm. Here, architected metamaterial plates with 50 nm thickness are leveraged to realize photophoretic levitation at the millimeter to centimeter scales. Instead of creating lift through conventional rotors or wings, the nanocardboard plates levitate due to light-induced thermal transpiration through microchannels within the plates, enabled by their extremely low mass and thermal conductivity. At atmospheric pressure, the plates hover above a solid substrate at heights of ≈0.5 mm by creating an air cushion beneath the plate. Moreover, at reduced pressures (10–200 Pa), the increased speed of thermal transpiration through the plate's channels creates an air jet that enables mid-air levitation and allows the plates to carry small payloads heavier than the plates themselves. The macroscopic metamaterial structures demonstrate the potential of this new mechanism of flight to realize nanotechnology-enabled flying vehicles without any moving parts in the Earth's upper atmosphere and at the surface of other planets.     

Prediction and sensitivity analysis of CNTs-modified asphalt’s adhesion force using a radial basis neural network model

Abstract

The expected longer service life of modified asphalt can be jeopardized by different environmental factors, such as moisture, oxidation, etc. which affect the desired properties by altering the adhesive property. An insight into knowledge of the adhesive property of the asphalt can help in providing more durable asphalt pavement. The study attempted to develop different models of adhesive properties of polymers and carbon nanotubes (CNTs) modified asphalt binders. The polymer-CNT modified asphalt is processed to prepare different types of samples, by simulating the damage due to moisture and oxidization, following the corresponding standard method. An Atomic Force Microscopy (AFM) was employed to assess the nanoscale adhesion force of the tested samples following the existing functional group in asphalt. Finally, the study has developed Radial Basis Function Neural Network (RBFNN) as a function of different parameters including; asphalt chemistry (i.e. AFM tip type and constant), type and percentages of polymers and CNTs and different environmental exposures (oxidation, moisture, etc.) to predict the nano adhesion force of asphalt. It is observed that the adhesive property of the Styrene–Butadiene modified asphalt is more consistent compared to the Styrene–Butadiene–Styrene modified asphalt, while the presence of Single-Wall Nanotubes (SWNT) is observed to affect the adhesive properties of asphalt significantly as compared to Multi-Wall Nanotubes (MWNT). The higher accuracy level of RBFNN model also indicates that the functional group (tip-type) adding with the percentages and types of polymers and CNTs significantly affect the adhesive properties of asphalt.     

硝酸对水质中重金属含量测定的影响研究

采用火焰原子吸收分光光度法对加硝酸和不加硝酸的浑浊和澄清水质样品中镍、锰、铜、锌、铅的浓度变化进行测定研究和对比,结果表明硝酸加入样品中能起到固定剂的作用,加入硝酸对于铜元素的浓度影响很小,对澄清水中的锰元素和铅元素影响也很小,但是加入硝酸对镍和锌元素有较大影响。     

In vivo assessment of the corrosion of nickel–titanium orthodontic archwires by using scanning electron microscopy and atomic force microscopy

This study was undertaken to assess in vivo the corrosion in two commercial nickel–titanium (NiTi) orthodontic archwires removed from the oral cavity of patients using fluoride mouthwashes. Five volunteers took part in this study on the corrosion behavior of two brands of NiTi archwires (3M and AO (brand of archwire)) during use of two mouthwashes with neutral sodium fluoride 1.1%, one with acidulated fluoride 1.1%, and one with placebo and a control group. Each patient used one mouthwash in three different periods of time for 1 min a day for 30 days. The archwires were assessed with scanning electron microscopy and atomic force microscopy for qualitative and quantitative analysis. The values obtained with atomic force microscopy (AFM) were submitted to normality test, two‐way analysis of variance, and Tukey's test at a significance level of 5%. The AFM images showed a gradual qualitative increase in the roughness of both types of wire between the treatments: control < placebo < neutral fluoride < acidulated fluoride. The arithmetic average of the roughness and root mean square of the roughness were similar. As for 3M archwires, only the acidulated fluoride group differed statistically from the others. As for AO archwires, the control and placebo groups did not differ from each other, but differed from the other fluoride treatments. The group using neutral fluoride also differed significantly from the acidulated fluoride group. 3M archwires were not affected by daily oral challenges. AO archwires were not affected by daily oral challenges either; their association with fluoride, either neutral or acidulated, increased their roughness.     

Evaluation of electrochemical properties of antibacterial ZnO layers deposited to 316LVM steel using atomic layer deposition

The presence of a biofilm can lead to the disappearance of the surrounding bone tissue and, as a result, disturb the osseointegration process. Unfortunately, both in the case of instability of the implant and long-term bacterial infections, there is often a need for reoperation as well as replacement of the implant, which in turn is associated with huge costs, but most of all discomfort for the patient associated with long-term hospitalization. In order to limit this unfavorable process, the physicochemical properties of the surface layer of implants are indicated. Therefore, the paper proposes applying a layer with antibacterial effect on the surface of 316LVM steel used in bone surgery. As part of the work, the ZnO layer was applied using the atomic layer deposition method with different parameters of the application process (different number of cycles at constant temperature). In the first stage, pitting corrosion resistance tests were carried out using the potentiodynamic method and studies using electrochemical impedance spectroscopy. The surface morphology tests using a scanning electron microscope were also complemented. Obtained results may form the basis for the development of more detailed criteria for the assessment of the final quality of medical devices used in the skeletal system.     

原子及近原子尺度制造——制造技术发展趋势

探讨了制造技术发展趋势，论述了制造历史发展的三个阶段，指出原子及近原子尺度制造（ACSM）是下一代制造技术的主流发展趋势，对未来科技发展和高端元件制造具有重要意义。详细分析阐述了ACSM的主要研究内容及关键科学问题，并提出了相应的建议和措施。     

氢化物原子荧光光谱法测定酱油中微量铅的方法研究

建立了一种快速、高效的QuEChERS-高效液相色谱-质谱联用法（QuEChERS-HPLC-MS/MS）测定谷类杂粮制品中脱氧雪腐镰刀菌烯醇（DON）、3-乙酰脱氧雪腐镰刀菌烯醇（3-ADON）、15-乙酰脱氧雪腐镰刀菌烯醇（15-ADON）和玉米赤霉烯酮（ZON）共4种真菌毒素。样品前处理采用乙腈-水溶剂提取，经Florisil+C18+无水硫酸镁净化后检测。以0.10%甲酸-乙腈作为流动相，在质谱检测器的多反应监测模式下进行分析。结果表明，4种真菌毒素在各自的线性范围内线性关系良好，相关系数R2均大于0.999，回收率在85.1%～102.0%，相对标准偏差（RSD）为2.11%～6.22%。该方法具有前处理简单、净化效果好、灵敏度高和检测速度快的优点，适用于谷类杂粮制品中DON、3-ADON、15-ADON 和ZON的分析和定量检测。